Showing all 7 results

    V-Groove Bits

  • VTX-Rv141

    VTX-Rv141-2FL (Coated, 45° x 2)

    Cut Length: 5mm, Cut: 10mm, Shank: 6mm

    $85.00

    VTX-Rv141-2FL (Coated, 45° x 2)

    “Super” carbide, coated, 2-flute, V-cut router bit with a 10mm cutting edge diameter and max milling depth of 5mm.

    Route - V-Fold
    Max Cut Depth: 5 mm (0.197 inch)
    Shank Diameter: 6
    Routing Diameter: 10
    $85.00
  • In stock

  • VTX-Rv141-A

    VTX-Rv141-2FL-A (Coated, 45° x 2)

    Cut Length: 5mm, Cut: 10mm, Shank: 6mm

    $95.00

    VTX-Rv141-2FL-A (Coated, 45° x 2)

    “Super” carbide, coated, 2-flute, V-cut router bit with a 10mm cutting edge diameter and max milling depth of 5mm. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    Route - V-Fold
    Max Cut Depth: 5 mm (0.197 inch)
    Shank Diameter: 6
    Routing Diameter: 10
    $95.00
  • VTX-Rv142

    VTX-Rv142-2FL (Flat Tip, 45° x 2)

    Cut Length: 9mm, Cut: 12mm, Shank: 6mm

    $65.00

    VTX-Rv142-2FL (Flat Tip, 45° x 2)

    Brazed carbide, 2-flute, 90° angle, v-cut router bit with a 12mm cutting edge diameter and max milling depth of 9mm. Has 2 flutes with 45° angles which creates a 90° v-cut angle. Tip is ground flat to allow for folding of ACM (Aluminum Composite Panels) materials.

    Route - V-Fold
    Max Cut Depth: 9 mm (0.354 inch)
    Shank Diameter: 6
    Routing Diameter: 12
    $65.00
  • In stock

    All Other Bits

  • VTX-Rc5415

    VTX-Rc5415 (Compression)

    Cut Length: 14mm, Cut: 4mm, Shank: 6mm

    $80.00

    VTX-Rc5415 (Compression)

    Multielement multilayered “rainbow” coated, “Super” carbide, polished, compression (both up and down flute) router bit with a 4mm cutting edge diameter and max milling depth of 14mm. Please note that this bit requires a minimum thickness of 3mm for the compression feature to work.

    Route - Compression
    Max Cut Depth: 14 mm (0.551 inch)
    Shank Diameter: 6
    Routing Diameter: 4
    $80.00
  • In stock

  • VTX-Rc5415-A

    VTX-Rc5415-A (Compression)

    Cut Length: 14mm, Cut: 4mm, Shank: 6mm

    $90.00

    VTX-Rc5415-A (Compression)

    Multielement multilayered “rainbow” coated, “Super” carbide, polished, compression (both up and down flute) router bit with a 4mm cutting edge diameter and max milling depth of 14mm. Please note that this bit requires a minimum thickness of 3mm for the compression feature to work. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    Route - Compression
    Max Cut Depth: 14 mm (0.551 inch)
    Shank Diameter: 6
    Routing Diameter: 4
    $90.00
  • VTX-RC5622

    VTX-Rc5622 (Compression)

    Cut Length: 22mm, Cut: 6mm, Shank: 6mm

    $80.00

    VTX-Rc5622 (Compression)

    Multielement multilayered “rainbow” coated, “Super” carbide, polished, compression (both up and down flute) router bit with a 6mm cutting edge diameter and max milling depth of 22mm. Please note that this bit requires a minimum thickness of 3mm for the compression feature to work.

    Route - Compression
    Max Cut Depth: 22 mm (0.866 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $80.00
  • In stock

  • VTX-RC5622A

    VTX-Rc5622-A (Compression)

    Cut Length: 22mm, Cut: 6mm, Shank: 6mm

    $90.00

    VTX-Rc5622-A (Compression)

    Multielement multilayered “rainbow” coated, “Super” carbide, polished, compression (both up and down flute) router bit with a 6mm cutting edge diameter and max milling depth of 22mm. Please note that this bit requires a minimum thickness of 3mm for the compression feature to work. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    Route - Compression
    Max Cut Depth: 22 mm (0.866 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $90.00

Showing all 7 results