- No products in the cart.
Showing 1–12 of 30 results
-
VTX-K-HS10 (ten pack)
Cut Length: 5mm
$20.00VTX-K-HS10 (ten pack)
High strength steel drag blade. Same design as the Zund Type 6 blade. For using in paper board and corrugated paper products. Often used for sample making. Blades are sold in packs of 10.
$20.00 -
VTX-K00335
Cut Length: 4mm
$24.00VTX-K00335
Single edge knife blade, designed for cutting corrugated plastic/cardboard substrates. Replacement for Colex T00335 blade.
$24.00 -
VTX-K16
Cut Length: 7.4mm
$29.00VTX-K16
Blade for softer materials. Utilized for both static drag knife and oscillation cutting applications.
$29.00 -
VTX-K16a (Asymmetrical)
Cut Length: 7.4mm
$35.00VTX-K16a (Asymmetrical)
K16 blade featuring asymmetrical cutting edge. Used for ridge-free inside cutting edge. Utilized for both static drag knife and oscillation cutting applications.
$35.00 -
VTX-K17
Cut Length: 12mm
$29.00VTX-K17
Knife blade for the cutting of thin materials. Less overcut but exerts more drag than the VTX-K16. For best results, use with an oscillating tool.
$29.00 -
VTX-K38
Cut Length: 8.5mm
$29.00VTX-K38
Knife blade for the cutting of thin materials particularly varnish blankets, flexo clicheés, processed for labels (Cyrel®), unprocessed (Cyrel®), display and folding carton, inkjet printing foil/glossy paper, etc.
$29.00 -
VTX-K46
Cut Length: 20mm
$46.00VTX-K46
Robust blade for variety of materials. Often used for foamboards up to 4.75 mm (3/16 inch). The blade exerts little drag force, but has a larger overcut.
$46.00 -
VTX-K46s
Cut Length: 20mm
$46.00VTX-K46s
Same design as the VTX-K46 but with a shorter shank length for use with certain table manufactures.
$46.00 -
VTX-K9801
Cut Length: 12mm
$29.00VTX-K9801
Blade for softer materials. Utilized for both static drag knife and oscillation cutting applications.
$29.00 -
VTX-E50r
Cut Length: 3.5mm
$46.00VTX-E50r
Single-edged blade with 6mm diameter cylindrical shank providing high rigidity for dense material/ high force cutting applications. Same blade as the EcoCam E50. Designed for use with Ecocam Tangential Cutting Modules.
$46.00 -
VTX-K17r
Cut Length: 12mm
$36.00VTX-K17r
A 6mm diameter cylindrical shank providing high rigidity for oscillate and drag cutting of denser materials. For best results, use with an oscillating tool.
$36.00 -
VTX-K17rh
Cut Length: 12mm
$38.00VTX-K17rh
A 6mm diameter cylindrical shank providing high rigidity for oscillate and drag cutting of denser materials. Similar to the VTX-K17r but has swept cutting edge for better performance in thicker materials. For best results, use with an oscillating tool.
$38.00
Single Edge Blades - Flat Stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Single Edge Blades - Round Stock
In stock
In stock
In stock
Showing 1–12 of 30 results
