- No products in the cart.
Showing all 8 results
-
VTX-Rv120-4FL (Coated, 60° x 2)
Cut Length: 1.7mm, Cut⌀: 6mm, Shank⌀: 6mm
$44.00VTX-Rv120-4FL (Coated, 60° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 1.7mm. Has 4 flutes with 60° angles which creates a 120° v-cut angle.
$44.00 -
VTX-Rv120-4FL-A (Coated, 60° x 2)
Cut Length: 1.7mm, Cut⌀: 6mm, Shank⌀: 6mm
$54.00VTX-Rv120-4FL-A (Coated, 60° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 1.7mm. Has 4 flutes with 60° angles which creates a 120° v-cut angle. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
$54.00 -
VTX-Rv141-2FL (Coated, 45° x 2)
Cut Length: 5mm, Cut⌀: 10mm, Shank⌀: 6mm
$85.00VTX-Rv141-2FL (Coated, 45° x 2)
“Super” carbide, coated, 2-flute, V-cut router bit with a 10mm cutting edge diameter and max milling depth of 5mm.
$85.00 -
VTX-Rv141-2FL-A (Coated, 45° x 2)
Cut Length: 5mm, Cut⌀: 10mm, Shank⌀: 6mm
$95.00VTX-Rv141-2FL-A (Coated, 45° x 2)
“Super” carbide, coated, 2-flute, V-cut router bit with a 10mm cutting edge diameter and max milling depth of 5mm. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
$95.00 -
VTX-Rv60-4FL (Coated, 30° x 2)
Cut Length: 5.2mm, Cut⌀: 6mm, Shank⌀: 6mm
$44.00VTX-Rv60-4FL (Coated, 30° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 5.2mm. Has 4 flutes with 30° angles which creates a 60° v-cut angle.
$44.00 -
VTX-Rv60-4FL-A (Coated, 30° x 2)
Cut Length: 5.2mm, Cut⌀: 6mm, Shank⌀: 6mm
$54.00VTX-Rv60-4FL-A (Coated, 30° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 5.2mm. Has 4 flutes with 30° angles which creates a 60° v-cut angle. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
$54.00 -
VTX-Rv90-4FL (Coated, 45° x 2)
Cut Length: 3mm, Cut⌀: 6mm, Shank⌀: 6mm
$44.00VTX-Rv90-4FL (Coated, 45° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 3mm. Has 4 flutes with 45° angles which creates a 90° v-cut angle.
$44.00 -
VTX-Rv90-4FL-A (Coated, 45° x 2)
Cut Length: 3mm, Cut⌀: 6mm, Shank⌀: 6mm
$54.00VTX-Rv90-4FL-A (Coated, 45° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 3mm. Has 4 flutes with 45° angles which creates a 90° v-cut angle. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
$54.00
V-Groove Bits
In stock
In stock
In stock
In stock
Showing all 8 results
