Showing all 11 results

    Single Edge Blades - Flat Stock

  • VTX-K38

    VTX-K38

    Cut Length: 8.5mm

    $29.00

    VTX-K38

    Knife blade for the cutting of thin materials particularly varnish blankets, flexo clicheés, processed for labels (Cyrel®), unprocessed (Cyrel®), display and folding carton, inkjet printing foil/glossy paper, etc.

    Knife - Static/Drag
    Max Cut Depth: 8.5 mm (0.335 inch)
    $29.00

    • In stock

    Double Edge Blades - Flat Stock

  • VTX-K101AX2

    VTX-K101a (Asymmetrical, Double Ended)

    Cut Length: 6.9mm

    $78.00

    VTX-K101a (Asymmetrical, Double Ended)

    Double-edged, double-ended, asymmetrical, blade for ridge free, inside cutting applications. Similar cutting profile as the K13.

    Knife - Static/Drag
    Max Cut Depth: 6.9 mm (0.272 inch)
    $78.00

    • In stock

  • VTX-K83AX2-2

    VTX-K83a (Asymmetrical, Double Ended)

    Cut Length: 4.8mm

    $78.00

    VTX-K83a (Asymmetrical, Double Ended)

    Double-edged, asymmetrical, blade for ridge free, inside cutting applications. Similar cutting profile as the K12.

    Knife - Static/Drag
    Max Cut Depth: 4.8 mm (0.189 inch)
    $78.00

    • In stock

    V-Cut Blades

  • VTX-K511

    VTX-K-TZ511

    Cut Length: 17mm

    $65.00

    VTX-K-TZ511

    Carbide bevel/v-cut drag blade for cutting through materials such as Re-board, X board and triple wall corrugated.

    Knife - V-Cut
    Max Cut Depth: 17 mm (0.669 inch)
    $65.00

    • In stock

    500 Series Bits - Up Cut

  • Ru556

    VTX-Ru556 (Coated)

    Cut Length: 32mm, Cut⌀: 6mm, Shank⌀: 6mm

    $60.00

    VTX-Ru556 (Coated)

    Multielement multilayered “rainbow” coated, “Super” carbide, multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 6mm cutting edge diameter and max milling depth of 32mm.

    Route - Through
    Max Cut Depth: 32 mm (1.26 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $60.00

    • In stock

  • Ru58118

    VTX-Ru58118 (Coated)

    Cut Length: 55mm, Cut⌀: 8mm, Shank⌀: 8mm

    $99.00

    VTX-Ru58118 (Coated)

    Multielement, multilayered “rainbow” coated, right-hand spiral (up cut) 2-flute router bit with a 8mm cutting edge diameter (CED), max milling depth (CEL) of 55mm, and overall length (OAL) of 90mm. Similar design to the VTX-Ru118.

    Route - Through
    Max Cut Depth: 55 mm (2.165 inch)
    Shank Diameter: 8
    Routing Diameter: 8
    $99.00

    • In stock

    V-Groove Bits

  • VTX-Rv142

    VTX-Rv142-2FL (Flat Tip, 45° x 2)

    Cut Length: 9mm, Cut⌀: 12mm, Shank⌀: 6mm

    $65.00

    VTX-Rv142-2FL (Flat Tip, 45° x 2)

    Brazed carbide, 2-flute, 90° angle, v-cut router bit with a 12mm cutting edge diameter and max milling depth of 9mm. Has 2 flutes with 45° angles which creates a 90° v-cut angle. Tip is ground flat to allow for folding of ACM (Aluminum Composite Panels) materials.

    Route - V-Fold
    Max Cut Depth: 9 mm (0.354 inch)
    Shank Diameter: 6
    Routing Diameter: 12
    $65.00

    • In stock

    Engraving / Braille Bits

  • VTX-E7

    VTX-E6 (Engrave)

    Cut Length: 3mm, Cut⌀: 6mm, Shank⌀: 6mm

    $36.00

    VTX-E6 (Engrave)

    Single flute engraving bit with 92 degree angle. For acrylics and plastics.

    Route - Engrave
    Max Cut Depth: 3 mm (0.118 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $36.00

    • In stock

  • VTX-E7-A

    VTX-E6-A (Engrave)

    Cut Length: 3mm, Cut⌀: 6mm, Shank⌀: 6mm

    $44.00

    VTX-E6-A (Engrave)

    Single flute engraving bit with 92 degree angle. For acrylics and plastics. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    Route - Engrave
    Max Cut Depth: 3 mm (0.118 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $44.00
  • VTX-E7

    VTX-E8 (Engrave)

    Cut Length: 7.5mm, Cut⌀: 6mm, Shank⌀: 6mm

    $36.00

    VTX-E8 (Engrave)

    Single flute engraving bit with 40 degree angle. For acrylics and plastics.

    Route - Engrave
    Max Cut Depth: 7.5 mm (0.295 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $36.00

    • In stock

  • VTX-E7-A

    VTX-E8-A (Engrave)

    Cut Length: 7.5mm, Cut⌀: 6mm, Shank⌀: 6mm

    $44.00

    VTX-E8-A (Engrave)

    Single flute engraving bit with 40 degree angle. For acrylics and plastics. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    Route - Engrave
    Max Cut Depth: 7.5 mm (0.295 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $44.00

Showing all 11 results