- No products in the cart.
Showing 73–84 of 99 results
-
VTX-Rv120-4FL-A (Coated, 60° x 2)
Cut Length: 1.7mm, Cut⌀: 6mm, Shank⌀: 6mm
$54.00VTX-Rv120-4FL-A (Coated, 60° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 1.7mm. Has 4 flutes with 60° angles which creates a 120° v-cut angle. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
$54.00 -
VTX-Rv141-2FL (Coated, 45° x 2)
Cut Length: 5mm, Cut⌀: 10mm, Shank⌀: 6mm
$85.00VTX-Rv141-2FL (Coated, 45° x 2)
“Super” carbide, coated, 2-flute, V-cut router bit with a 10mm cutting edge diameter and max milling depth of 5mm.
$85.00 -
VTX-Rv141-2FL-A (Coated, 45° x 2)
Cut Length: 5mm, Cut⌀: 10mm, Shank⌀: 6mm
$95.00VTX-Rv141-2FL-A (Coated, 45° x 2)
“Super” carbide, coated, 2-flute, V-cut router bit with a 10mm cutting edge diameter and max milling depth of 5mm. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
$95.00 -
VTX-Rv142-2FL (Flat Tip, 45° x 2)
Cut Length: 9mm, Cut⌀: 12mm, Shank⌀: 6mm
$65.00VTX-Rv142-2FL (Flat Tip, 45° x 2)
Brazed carbide, 2-flute, 90° angle, v-cut router bit with a 12mm cutting edge diameter and max milling depth of 9mm. Has 2 flutes with 45° angles which creates a 90° v-cut angle. Tip is ground flat to allow for folding of ACM (Aluminum Composite Panels) materials.
$65.00 -
VTX-Rv60-4FL (Coated, 30° x 2)
Cut Length: 5.2mm, Cut⌀: 6mm, Shank⌀: 6mm
$44.00VTX-Rv60-4FL (Coated, 30° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 5.2mm. Has 4 flutes with 30° angles which creates a 60° v-cut angle.
$44.00 -
VTX-Rv60-4FL-A (Coated, 30° x 2)
Cut Length: 5.2mm, Cut⌀: 6mm, Shank⌀: 6mm
$54.00VTX-Rv60-4FL-A (Coated, 30° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 5.2mm. Has 4 flutes with 30° angles which creates a 60° v-cut angle. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
$54.00 -
VTX-Rv90-4FL (Coated, 45° x 2)
Cut Length: 3mm, Cut⌀: 6mm, Shank⌀: 6mm
$44.00VTX-Rv90-4FL (Coated, 45° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 3mm. Has 4 flutes with 45° angles which creates a 90° v-cut angle.
$44.00 -
VTX-Rv90-4FL-A (Coated, 45° x 2)
Cut Length: 3mm, Cut⌀: 6mm, Shank⌀: 6mm
$54.00VTX-Rv90-4FL-A (Coated, 45° x 2)
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 3mm. Has 4 flutes with 45° angles which creates a 90° v-cut angle. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
$54.00 -
VTX-Rui121814 (Coated)
Cut Length: 1/2 inch, Cut⌀: 1/8 inch, Shank⌀: 1/4 inch
$47.00VTX-Rui121814 (Coated)
Multielement multilayered “rainbow” coated, “Super” carbide, multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 1/8 inch cutting edge diameter and max milling depth of 1/2 inch. Overall length of 2 inches and 1/4 inch shank diameter
$47.00 -
VTX-Rui13317a (Coated)
Cut Length: 1/2 inch, Cut⌀: 1/8 inch, Shank⌀: 1/8 inch
$30.00VTX-Rui13317a (Coated)
Multielement multilayered “rainbow” coated, “Super” carbide, multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 1/8 inch cutting edge diameter and max milling depth of 1/2 inch. Overall length of 2 inches and 1/8 inch shank diameter.
$30.00 -
VTX-Rui13635 (Coated)
Cut Length: 3/4 inch, Cut⌀: 1/4 inch, Shank⌀: 1/4 inch
$47.00VTX-Rui13635 (Coated)
Multielement multilayered “rainbow” coated, “Super” carbide, multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 1/4 inch cutting edge diameter and max milling depth of 3/4 inch. Overall length of 2 inches and 1/4 inch shank diameter.
$47.00 -
VTX-Rui1411614 (Coated)
Cut Length: 1/4 inch, Cut⌀: 1/16 inch, Shank⌀: 1/4 inch
$47.00VTX-Rui1411614 (Coated)
Multielement multilayered “rainbow” coated, “Super” carbide, multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 1/16 inch cutting edge diameter and max milling depth of 1/4 inch. Overall length of 2 inches and 1/4 inch shank diameter.
$47.00
V-Groove Bits
In stock
In stock
In stock
In stock
Standard / Inch Bits - Up Cut
In stock
In stock
In stock
In stock
Showing 73–84 of 99 results
