Showing 85–95 of 95 results

    All Other Bits

  • VTX-E7

    VTX-E7 (Carbide++, Engrave)

    $36.00

    VTX-E7 (Carbide++, Engrave)

    Single flute engraving bit with 60 degree angle. For acrylics and plastics.

    Route - Engrave
    Max Cut Depth: 4.7 mm (0.185 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $36.00

    • In stock

  • VTX-E7-A

    VTX-E7-A (Carbide++, Engrave)

    $44.00

    VTX-E7-A (Carbide++, Engrave)

    Single flute engraving bit with 60 degree angle. For acrylics and plastics. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    Route - Engrave
    Max Cut Depth: 4.7 mm (0.185 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $44.00
  • Braille

    VTX-RbA35001019-EA (Braille Bit – Soft/Pliable Acrylic)

    $59.00

    VTX-RbA35001019-EA (Braille Bit – Soft/Pliable Acrylic)

    ACCENT SIGNAGE RASTER® Braille cutter bit for soft/pliable acrylic. For use with the Accent Signage raster ADA plastics braille system.

    This specially designed bit effortlessly create the perfect sized hole to fit Raster® spheres into soft/pliable plastic material for Americans with Disabilities Act (ADA) signage.

    Accent Signage offers only the highest quality engraving bits designed to create flawless ADA compliant signs.

    Available for both top-loading and bottom-loading systems.

    Compatible sheet material:

    • Most Rowmark ADA Alternative materials and other acrylics
    Route - Engrave
    Shank Diameter: 6
    Routing Diameter: 0.254
    $59.00

    • In stock

  • VTX-RbA35001019-EA-A (Braille Bit – Soft/Pliable Acrylic)

    $70.00

    VTX-RbA35001019-EA-A (Braille Bit – Soft/Pliable Acrylic)

    ACCENT SIGNAGE RASTER® Braille cutter bit for soft/pliable acrylic. For use with the Accent Signage raster ADA plastics braille system. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    This specially designed bit effortlessly create the perfect sized hole to fit Raster® spheres into soft/pliable plastic material for Americans with Disabilities Act (ADA) signage.

    Accent Signage offers only the highest quality engraving bits designed to create flawless ADA compliant signs.

    Available for both top-loading and bottom-loading systems.

    Compatible sheet material:

    • Most Rowmark ADA Alternative materials and other acrylics
    Route - Engrave
    Shank Diameter: 6
    Routing Diameter: 0.254
    $70.00
  • Braille

    VTX-RbA35001020-EA (Braille Bit – Hard/Rigid Acrylic)

    $59.00

    VTX-RbA35001020-EA (Braille Bit – Hard/Rigid Acrylic)

    ACCENT SIGNAGE RASTER® Braille cutter bit for hard/rigid acrylic. For use with the Accent Signage raster ADA plastics braille system.

    This specially designed bit effortlessly create the perfect sized hole to fit Raster® spheres into hard/rigid plastic material for Americans with Disabilities Act (ADA) signage.

    Accent Signage offers only the highest quality engraving bits designed to create flawless ADA compliant signs.

    Available for both top-loading and bottom-loading systems.

    Compatible sheet material:

    • Cast Acrylic
    Route - Engrave
    Shank Diameter: 6
    Routing Diameter: 1.5621
    $59.00

    • In stock

  • VTX-RbA35001020-EA-A (Braille Bit – Hard/Rigid Acrylic)

    $70.00

    VTX-RbA35001020-EA-A (Braille Bit – Hard/Rigid Acrylic)

    ACCENT SIGNAGE RASTER® Braille cutter bit for hard/rigid acrylic. For use with the Accent Signage raster ADA plastics braille system. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    This specially designed bit effortlessly create the perfect sized hole to fit Raster® spheres into hard/rigid plastic material for Americans with Disabilities Act (ADA) signage.

    Accent Signage offers only the highest quality engraving bits designed to create flawless ADA compliant signs.

    Available for both top-loading and bottom-loading systems.

    Compatible sheet material:

    • Cast Acrylic
    Route - Engrave
    Shank Diameter: 6
    Routing Diameter: 1.5621
    $70.00
  • VTX-Rc5415

    VTX-Rc5415 (Compression)

    $80.00

    VTX-Rc5415 (Compression)

    Multielement multilayered “rainbow” coated, “Super” carbide, polished, compression (both up and down flute) router bit with a 4mm cutting edge diameter and max milling depth of 14mm. Please note that this bit requires a minimum thickness of 3mm for the compression feature to work.

    Route - Compression
    Max Cut Depth: 14 mm (0.551 inch)
    Shank Diameter: 6
    Routing Diameter: 4
    $80.00

    • In stock

  • VTX-Rc5415-A

    VTX-Rc5415-A (Compression)

    $90.00

    VTX-Rc5415-A (Compression)

    Multielement multilayered “rainbow” coated, “Super” carbide, polished, compression (both up and down flute) router bit with a 4mm cutting edge diameter and max milling depth of 14mm. Please note that this bit requires a minimum thickness of 3mm for the compression feature to work. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    Route - Compression
    Max Cut Depth: 14 mm (0.551 inch)
    Shank Diameter: 6
    Routing Diameter: 4
    $90.00
  • VTX-RC5622

    VTX-Rc5622 (Compression)

    $80.00

    VTX-Rc5622 (Compression)

    Multielement multilayered “rainbow” coated, “Super” carbide, polished, compression (both up and down flute) router bit with a 6mm cutting edge diameter and max milling depth of 22mm. Please note that this bit requires a minimum thickness of 3mm for the compression feature to work.

    Route - Compression
    Max Cut Depth: 22 mm (0.866 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $80.00

    • In stock

  • VTX-RC5622A

    VTX-Rc5622-A (Compression)

    $90.00

    VTX-Rc5622-A (Compression)

    Multielement multilayered “rainbow” coated, “Super” carbide, polished, compression (both up and down flute) router bit with a 6mm cutting edge diameter and max milling depth of 22mm. Please note that this bit requires a minimum thickness of 3mm for the compression feature to work. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).

    Route - Compression
    Max Cut Depth: 22 mm (0.866 inch)
    Shank Diameter: 6
    Routing Diameter: 6
    $90.00
  • VTX-Ru8055

    VTX-Ru855 (Carbide++)

    $91.00

    VTX-Ru855 (Carbide++)

    Right-hand spiral (up cut) “O” flute router bit with a 8mm cutting edge diameter (CED), max milling depth (CEL) of 55mm, and overall length (OAL) of 90mm. Designed for acrylics, PMMA (Plexiglas®, Perspex®, etc.), foamed PVC/PS (Forex®, Sintra®, etc.).

    Route - Through
    Max Cut Depth: 55 mm (2.165 inch)
    Shank Diameter: 8
    Routing Diameter: 8
    $91.00

    • In stock

Showing 85–95 of 95 results