- No products in the cart.
Showing 1–12 of 16 results
-
VTX-K46r
Cut Length: 20mm
$53.00VTX-K46r
A 8mm diameter cylindrical shank providing high rigidity for drag cutting of denser materials with a maximum cut length of 20mm. Often used for foamboards up to 4.75 mm (3/16 inch). The blade exerts little drag force, but has a larger overcut.
$53.00 -
VTX-K8124r
Cut Length: 10mm
$49.00VTX-K8124r
Tungsten carbide blade designed for cutting a variety of corrugated products up to 10mm thick.
$49.00 -
VTX-K8140r
Cut Length: 8mm
$54.00VTX-K8140r
A 8mm diameter cylindrical shank providing high rigidity for drag cutting of denser materials.
$54.00 -
VTX-K8160r
Cut Length: 13mm
$56.00VTX-K8160r
A 8mm diameter cylindrical shank providing high rigidity for drag cutting of rigid substrates such as different gasket materials, Forex and solid carton board. Nominal lag value is 4mm.
$56.00 -
VTX-K8170r
Cut Length: 6.5mm
$44.00VTX-K8170r
Single-edged blade with 8mm diameter cylindrical shank providing high rigidity for materials such as folding carton, polyester film, leather, vinyl and paper.
$44.00 -
VTX-K8171ra
Cut Length: 6mm
$44.00VTX-K8171ra
Tungsten carbide blade for thinner flexible or rigid materials such as solid carton, vinyl, plastics. 30° cutting angle. Asymmetric knife blade that ploughs all burrs and waste to one side.
$44.00 -
VTX-K8172r
Cut Length: 4.5mm
$44.00VTX-K8172r
Single-edged blade with 8mm diameter cylindrical shank providing high rigidity for materials such as folding carton, polyester film, leather, vinyl and paper.
$44.00 -
VTX-K8174r
Cut Length: 4.5mm
$55.00VTX-K8174r
Single-edged blade with 8mm diameter cylindrical shank providing high rigidity for materials such as corrugated board, folding carton, polyester film, leather, vinyl and paper.Â
$55.00 -
VTX-K8174rc
Cut Length: 4.5mm
$74.00VTX-K8174rc
Single-edged blade with 8mm diameter cylindrical shank providing high rigidity for materials such as folding carton, polyester film, leather, vinyl and paper. Coated for prolonged edge life.
$74.00 -
VTX-K8184r
Cut Length: 5mm
$55.00VTX-K8184r
A 8mm diameter cylindrical shank with a max cut length of 5mm. For drag cutting of thin paper and folding carton. Works well on very fragile and porous materials paper pulp materials that contain high recycled content.
$55.00 -
VTX-K12r
Cut Length: 4.8mm
$52.00VTX-K12r
Double-edged blade with 8mm diameter cylindrical shank providing high rigidity for dense material/ high force cutting applications. Same cut parameters as the Z10 and VTX-K12 but with much higher rigidity. The blunter angle reduces the risk for breaking the blade in tough materials, but creates more overcut with thicker materials.
$52.00 -
VTX-K13r
Cut Length: 6.9mm
$52.00VTX-K13r
Double-edged blade with 8mm diameter cylindrical shank providing high rigidity for dense material/ high force cutting applications. Same cut parameters as the Z11 and VTX-K13 but with much higher rigidity. Similar to VTX-K12r, but with less overcut and longer life expectancy.
$52.00
Single Edge Blades - Round Stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Double Edge Blades - Round Stock
In stock
In stock
Showing 1–12 of 16 results
