$56.00
Multielement multilayered “rainbow” coated, “Super” carbide, multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 1/4 inch cutting edge diameter and max milling depth of 1.25 inch. Overall length of 2.5 inches and 1/4 inch shank diameter.
In stock
Multielement multilayered “rainbow” coated, “Super” carbide, multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 1/4 inch cutting edge diameter and max milling depth of 1.25 inch. Overall length of 2.5 inches and 1/4 inch shank diameter.
| Process Category | Router Bits |
|---|---|
| Process Type | Route – Through |
| Compatible Machines / Models | Colex: SX/SXC/PX; Kongsberg: XP/C; Zund: G3, S3; Gerber: MCT; Summa: F Series; Multicam: Celero/Digital Express; Cutworx: Apex Series; Laguna: SmartShop, Swift MT; Mimaki: Mimaki; |
| Flutes | 1 Flute |
| Cut Angle | Up Cut |
| Routing Diameter | 1/4 inch |
| Max Cut Length | 1 1/4 inch |
| Max RPM | 50000 |
| Shank Diameter | 1/4 inch |
| Length Overall | 2.5 inch |
| Board - Rigid | Acrylic, Dibond®, E-Panel®, EVA – Ethylene Vinyl Acetate, Expanded PVC, Gatorfoam®, Gatorplast®, HDU – High Density Urethane, Komatex®, Max Metal®, Plaskolite®, Polycarbonate Board, Polyethylene 4 lbs., Sign Foam®, Sintra®, Ultra Board® |
| Metal | Aluminum, ChromaLuxe® HD Aluminum, Hard Brass |
| Wood | Birch Plywood, MDF, Poplar |
Cut Length: 7mm, Cut⌀: 2mm, Shank⌀: 6mm
$32.00Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 2mm cutting edge diameter and max milling depth of 6mm. If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
In stock
Cut Length: 16mm, Cut⌀: 5mm, Shank⌀: 6mm
$36.00Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 5mm cutting edge diameter and max milling depth of 16mm. If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
In stock
Cut Length: 14mm, Cut⌀: 4mm, Shank⌀: 6mm
$40.00Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 4mm cutting edge diameter and max milling depth of 14mm. With stop ring (for use with the Zund ARC system and CUTWORX Tools Changer). If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
