$54.00
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 3mm. Has 4 flutes with 45° angles which creates a 90° v-cut angle. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
“Super” carbide, coated, 4-flute, V-cut router bit with a 6mm cutting edge diameter and max milling depth of 3mm. Has 4 flutes with 45° angles which creates a 90° v-cut angle. With stop ring (for use with the Zund ARC system and CUTWORX Tool Changer).
| Process Category | Router Bits |
|---|---|
| Process Type | Route – V-Fold |
| Compatible Machines / Models | Zund: G3, S3; Cutworx: Apex Series; |
| Flutes | 4 flutes |
| Cut Angle | 45° x 2 – 90° |
| Routing Diameter | 6 mm (0.236 inch) |
| Max Cut Length | 3 mm (0.118 inch) |
| Max RPM | 50000 |
| Shank Diameter | 6 mm |
| Length Overall | 60 mm (2.362 inch) |
| Board - Rigid | ACM, Acrylic, Alucobond, Dibond®, Dilite, E-Panel®, EVA – Ethylene Vinyl Acetate, Expanded PVC, Gatorfoam®, Gatorplast®, HDU – High Density Urethane, IGEPA Bond Premium, IGPA, Komatex®, Max Metal®, Plaskolite®, Polycarbonate Board, Polyethylene 4 lbs., Precision Board®, Reynobond, Sign Foam®, Sintra®, Ultra Board® |
| Metal | Aluminum, ChromaLuxe® HD Aluminum, Hard Brass |
| Wood | Balsa, Birch Plywood, MDF, Poplar |
Cut Length: 22mm, Cut⌀: 6mm, Shank⌀: 6mm
$36.00Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 6mm cutting edge diameter and max milling depth of 22mm. If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
In stock
Cut Length: 7mm, Cut⌀: 2mm, Shank⌀: 6mm
$30.00Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 2mm cutting edge diameter and max milling depth of 6mm. If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
In stock
Cut Length: 7mm, Cut⌀: 2mm, Shank⌀: 6mm
$39.00Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 2mm cutting edge diameter and max milling depth of 6mm. With stop ring (for use with the Zund ARC system and CUTWORX Tools Changer). If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
