$46.00
Multi-purpose, single O-flute, left-hand spiral (down cut) router bit with a 3mm cutting edge diameter and max milling depth of 14mm. With stop ring (for use with the Zund ARC system and CUTWORX Tools Changer). If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
Multi-purpose, single O-flute, left-hand spiral (down cut) router bit with a 3mm cutting edge diameter and max milling depth of 14mm. With stop ring (for use with the Zund ARC system and CUTWORX Tools Changer). If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
| Process Category | Router Bits |
|---|---|
| Process Type | Route – Through |
| Compatible Machines / Models | Zund: G3, S3; Cutworx: Apex Series; |
| Flutes | 1 Flute |
| Cut Angle | Down Cut |
| Routing Diameter | 3 mm (0.118 inch) |
| Max Cut Length | 14 mm (0.551 inch) |
| Max RPM | 50000 |
| Shank Diameter | 6 mm |
| Length Overall | 60 mm (2.362 inch) |
| Board - Rigid | Acrylic, Dibond®, E-Panel®, EVA – Ethylene Vinyl Acetate, Expanded PVC, Gatorfoam®, Gatorplast®, HDU – High Density Urethane, Komatex®, Max Metal®, Plaskolite®, Polycarbonate Board, Polyethylene 4 lbs., Sign Foam®, Sintra®, Ultra Board® |
| Metal | Aluminum, ChromaLuxe® HD Aluminum, Hard Brass |
| Wood | Birch Plywood, MDF, Poplar |
Multi-purpose, single O-flute, left-hand spiral (down cut) router bit with a 4mm cutting edge diameter and max milling depth of 22mm.
In stock
Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 5mm cutting edge diameter and max milling depth of 16mm. With stop ring (for use with the Zund ARC system and CUTWORX Tools Changer). If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 2mm cutting edge diameter and max milling depth of 6mm. With stop ring (for use with the Zund ARC system and CUTWORX Tools Changer). If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
