$36.00
Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 6mm cutting edge diameter and max milling depth of 22mm. If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
In stock
Multi-purpose (not recommended for ACM and metals), single O-flute, right-hand spiral (up cut) router bit with a 6mm cutting edge diameter and max milling depth of 22mm. If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
| Process Category | Router Bits |
|---|---|
| Process Type | Route – Through |
| Compatible Machines / Models | Colex: SX/SXC/PX; Kongsberg: XP/C; Zund: G3, S3; Gerber: MCT; Summa: F Series; Multicam: Celero/Digital Express; Cutworx: Apex Series; |
| Flutes | 1 Flute |
| Cut Angle | Up Cut |
| Routing Diameter | 6 mm (0.236 inch) |
| Max Cut Length | 22 mm (0.866 inch) |
| Max RPM | 50000 |
| Shank Diameter | 6 mm |
| Length Overall | 60 mm (2.362 inch) |
| Board - Rigid | Acrylic, EVA – Ethylene Vinyl Acetate, Expanded PVC, Gatorfoam®, Gatorplast®, HDU – High Density Urethane, Komatex®, Plaskolite®, Polycarbonate Board, Polyethylene 4 lbs., Sign Foam®, Sintra®, Ultra Board® |
| Metal | Aluminum, ChromaLuxe® HD Aluminum, Hard Brass |
| Wood | Birch Plywood, MDF, Poplar |
Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 6mm cutting edge diameter and max milling depth of 22mm. With stop ring (for use with the Zund ARC system and CUTWORX Tools Changer). If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
Multi-purpose, single O-flute, left-hand spiral (down cut) router bit with a 4mm cutting edge diameter and max milling depth of 22mm.
In stock
Multi-purpose, single O-flute, right-hand spiral (up cut) router bit with a 4mm cutting edge diameter and max milling depth of 14mm. If cutting metals or ACM we highly recommend our Rainbow/DLC coated 500 series.
In stock
